Custom Precision Pins - Custom Dowel Pins & Precision Pins https://www.engineeredprecisionpins.com/portfolio-category/custom-precision-dowel-knurled-machined-pins/ Custom precision dowel pins, precision machined pins, knurled pins, and custom tapered pins Sat, 19 Sep 2026 23:30:26 +0000 en-US hourly 1 https://wordpress.org/?v=7.1.1 194122443 Custom 6061 Aluminum Precision Flat Head Pins https://www.engineeredprecisionpins.com/portfolio/custom-6061-aluminum-precision-flat-head-pins/ Sat, 19 Sep 2026 23:30:26 +0000 https://www.engineeredprecisionpins.com/?post_type=liquid-portfolio&p=5661 The post Custom 6061 Aluminum Precision Flat Head Pins appeared first on Custom Dowel Pins & Precision Pins.

]]>

These custom miniature aluminum flat head pins were manufactured for our specialty OEM customer using 6061 aluminum material with plain finish. The flat head measured 2MM in diameter and .19MM in height, with the shoulder extension set to 1.308MM diameter by 2.174MM in length. Material certs were available with the parts.

The post Custom 6061 Aluminum Precision Flat Head Pins appeared first on Custom Dowel Pins & Precision Pins.

]]> 5661 Custom Steel Slider Lock Pins With Cotter Pins https://www.engineeredprecisionpins.com/portfolio/custom-steel-slider-lock-pins-with-cotter-pin-factories/ Mon, 22 Jul 2024 16:17:59 +0000 https://www.engineeredprecisionpins.com/?post_type=liquid-portfolio&p=5654 The post Custom Steel Slider Lock Pins With Cotter Pins appeared first on Custom Dowel Pins & Precision Pins.

]]>

These custom machined steel post pins were manufactured using low carbon steel with plain finish. The head measured .41″ in diameter and the shoulder .200″ with a .063 thru hole for the cotter pin. The pins measured .60″ in overall length underneath the head. Cotter pin and washer used for the full assembly at application were also custom made to drawing for our electronics customer.

The post Custom Steel Slider Lock Pins With Cotter Pins appeared first on Custom Dowel Pins & Precision Pins.

]]> 5654 Custom 1020 Steel Precision Machined Step Pins https://www.engineeredprecisionpins.com/portfolio/custom-1020-steel-precision-machined-step-pins/ Tue, 28 May 2024 17:07:02 +0000 https://www.engineeredprecisionpins.com/?post_type=liquid-portfolio&p=5651 The post Custom 1020 Steel Precision Machined Step Pins appeared first on Custom Dowel Pins & Precision Pins.

]]>

These custom precision machined stepped pins were manufactured using 1020 steel material with the larger diameter set to .156″ +/-.001 and the smaller diameter at .092″ +/-.002. The overall length measured 1.09″ +/-.01 and the point incorporated a radius of R.078. Material certs were provided with the parts per customer requirements.

The post Custom 1020 Steel Precision Machined Step Pins appeared first on Custom Dowel Pins & Precision Pins.

]]> 5651 Custom 360 Brass Precision Machined Electronics Pins https://www.engineeredprecisionpins.com/portfolio/custom-360-brass-precision-machined-electronics-pins/ Thu, 28 Sep 2023 19:42:58 +0000 https://www.engineeredprecisionpins.com/?post_type=liquid-portfolio&p=5627 The post Custom 360 Brass Precision Machined Electronics Pins appeared first on Custom Dowel Pins & Precision Pins.

]]>

These custom precision machined headed pins were manufactured using 360 Brass Alloy material per QQ-B-626. Similar to the brass spacer in one of the prior posts this pin had a critical diameter dimension of .039″ +0/-.002″ for the extended pin. The overall length of the part was set to .165″ and the head height at .031, with both measurements being held to a +/-.002″ tolerance. Full certs were provided with the parts.

The post Custom 360 Brass Precision Machined Electronics Pins appeared first on Custom Dowel Pins & Precision Pins.

]]> 5627 Custom Socket Drive Partially Threaded Electronics Pins https://www.engineeredprecisionpins.com/portfolio/custom-socket-drive-partially-threaded-electronics-pin-manufacturers/ Mon, 10 Jul 2023 19:11:46 +0000 https://www.engineeredprecisionpins.com/?post_type=liquid-portfolio&p=5624 The post Custom Socket Drive Partially Threaded Electronics Pins appeared first on Custom Dowel Pins & Precision Pins.

]]>

We supplied these custom socket drive partially threaded pins to our electronics customer in 316 stainless steel material with plain finish. A cold formed socket 3MM hex drive was incorporated on the threaded side and M6-1.0 thread was rolled to a length of 26MM. The unthreaded side measures 19MM in length and 4MM in diameter with slightly chamfered corners.

The post Custom Socket Drive Partially Threaded Electronics Pins appeared first on Custom Dowel Pins & Precision Pins.

]]> 5624 Custom 416 Stainless Steel Precision Shoulder Pins https://www.engineeredprecisionpins.com/portfolio/custom-416-stainless-steel-precision-shoulder-pins/ Fri, 05 May 2023 17:25:05 +0000 https://www.engineeredprecisionpins.com/?post_type=liquid-portfolio&p=5621 The post Custom 416 Stainless Steel Precision Shoulder Pins appeared first on Custom Dowel Pins & Precision Pins.

]]>

These custom precision machined shoulder pins were manufactured using 416 stainless steel material for our customer that manufactures scientific measurement instrumentation. The shoulder diameter was set to .311″ +/- .001 and the length under the flange is 1.175″ +.002/-.000. Flange diameter was set to .375″ +.001/-.005 and the thickness at .020″ +.000/-.002. Full certs were provided with the parts per our customer’s requirement.

The post Custom 416 Stainless Steel Precision Shoulder Pins appeared first on Custom Dowel Pins & Precision Pins.

]]> 5621 Custom Stainless Steel Step Down Precision Pins https://www.engineeredprecisionpins.com/portfolio/custom-stainless-steel-step-down-precision-pins/ Fri, 18 Nov 2022 21:29:01 +0000 https://www.engineeredprecisionpins.com/?post_type=liquid-portfolio&p=5617 The post Custom Stainless Steel Step Down Precision Pins appeared first on Custom Dowel Pins & Precision Pins.

]]>

We provided these custom stainless steel step down precision pins to our utilities customer. It took a few iterations of the design and specifications to dial in the drawing and we then produced these parts using 18-8 stainless steel material with plain finish. Prior to our production our customer was manually assembling this part using the 3 individual components and we eliminated that cumbersome process by providing a single fully machined version.

The post Custom Stainless Steel Step Down Precision Pins appeared first on Custom Dowel Pins & Precision Pins.

]]> 5617 Custom Airframe Double Thread 17-4PH Precision Pins https://www.engineeredprecisionpins.com/portfolio/custom-airframe-double-thread-17-4ph-precision-pins/ Fri, 18 Nov 2022 21:16:59 +0000 https://www.engineeredprecisionpins.com/?post_type=liquid-portfolio&p=5615 The post Custom Airframe Double Thread 17-4PH Precision Pins appeared first on Custom Dowel Pins & Precision Pins.

]]>

We had 4 different size variations of these custom airframe double thread 17-4PH precision pins manufactured for our aerospace and defense customer, with all production done domestically in the USA and the raw material DFARS compliant. A combination of M6 X 1.0 and 10-32 UNJF rolled thread was required for each variation. Lead time was the biggest challenge on these parts due to the rolled thread requirement and heat treat process but we managed to have all 4 parts completed within the requested timeframe. Full certs were provided with the parts including a FAIR.

The post Custom Airframe Double Thread 17-4PH Precision Pins appeared first on Custom Dowel Pins & Precision Pins.

]]> 5615 Custom Tapered Dowel Pins In 303 Stainless Steel https://www.engineeredprecisionpins.com/portfolio/custom-tapered-dowel-pins-in-303-stainless-steel/ Wed, 18 May 2022 15:35:34 +0000 https://www.engineeredprecisionpins.com/?post_type=liquid-portfolio&p=5609 The post Custom Tapered Dowel Pins In 303 Stainless Steel appeared first on Custom Dowel Pins & Precision Pins.

]]>

We had 50,000 pieces of these custom tapered dowel pins manufactured using 303 stainless steel material for our automotive component manufacturing customer. Overall length was set to 12.56mm +/- 0.3mm and the diameter measured 4mm +.05mm/-.10mm. The tapered point was machined to a 54 +/- degree angle. Full certs were provided with the parts per our customer requirements.

The post Custom Tapered Dowel Pins In 303 Stainless Steel appeared first on Custom Dowel Pins & Precision Pins.

]]> 5609 Custom Precision Adapter Dowel Pins – 4140 Alloy Steel https://www.engineeredprecisionpins.com/portfolio/custom-precision-adapter-dowel-pins-4140/ Fri, 13 May 2022 19:37:46 +0000 https://www.engineeredprecisionpins.com/?post_type=liquid-portfolio&p=5606 The post Custom Precision Adapter Dowel Pins – 4140 Alloy Steel appeared first on Custom Dowel Pins & Precision Pins.

]]>

These custom precision adapter dowel pins were manufactured for our defense customer using 4140 alloy steel material with Rc 38-42 hardness with plain finish. Production was done in the USA and the pins measured .10800″ +/- .00025″ in diameter and .375″ +/-.010″ in overall length. Full certs were provided with the parts per customer’s instructions.

The post Custom Precision Adapter Dowel Pins – 4140 Alloy Steel appeared first on Custom Dowel Pins & Precision Pins.

]]> 5606