Custom Dowel Pins - Custom Dowel Pins & Precision Pins https://www.engineeredprecisionpins.com/portfolio-category/custom-made-precision-dowel-pins/ Custom precision dowel pins, precision machined pins, knurled pins, and custom tapered pins Tue, 19 Mar 2024 17:41:20 +0000 en-US hourly 1 https://wordpress.org/?v=6.5.3 194122443 Custom Stainless Steel Chamfered Dowel Pins https://www.engineeredprecisionpins.com/portfolio/custom-stainless-steel-chamfered-dowel-pin-manufacturers/ Tue, 19 Mar 2024 17:41:20 +0000 https://www.engineeredprecisionpins.com/?post_type=liquid-portfolio&p=5644 The post Custom Stainless Steel Chamfered Dowel Pins appeared first on Custom Dowel Pins & Precision Pins.

]]>

These custom stainless steel dowel pins were manufactured in lengths ranging from 2-1/2″ to 9″ and a diameter of 1/8″. 304 stainless steel material was used and the pins were factory passivated after the chamfer was applied on each side.

The post Custom Stainless Steel Chamfered Dowel Pins appeared first on Custom Dowel Pins & Precision Pins.

]]> 5644 Custom Tapered Dowel Pins In 303 Stainless Steel https://www.engineeredprecisionpins.com/portfolio/custom-tapered-dowel-pins-in-303-stainless-steel/ Wed, 18 May 2022 15:35:34 +0000 https://www.engineeredprecisionpins.com/?post_type=liquid-portfolio&p=5609 The post Custom Tapered Dowel Pins In 303 Stainless Steel appeared first on Custom Dowel Pins & Precision Pins.

]]>

We had 50,000 pieces of these custom tapered dowel pins manufactured using 303 stainless steel material for our automotive component manufacturing customer. Overall length was set to 12.56mm +/- 0.3mm and the diameter measured 4mm +.05mm/-.10mm. The tapered point was machined to a 54 +/- degree angle. Full certs were provided with the parts per our customer requirements.

The post Custom Tapered Dowel Pins In 303 Stainless Steel appeared first on Custom Dowel Pins & Precision Pins.

]]> 5609 Custom Precision Adapter Dowel Pins – 4140 Alloy Steel https://www.engineeredprecisionpins.com/portfolio/custom-precision-adapter-dowel-pins-4140/ Fri, 13 May 2022 19:37:46 +0000 https://www.engineeredprecisionpins.com/?post_type=liquid-portfolio&p=5606 The post Custom Precision Adapter Dowel Pins – 4140 Alloy Steel appeared first on Custom Dowel Pins & Precision Pins.

]]>

These custom precision adapter dowel pins were manufactured for our defense customer using 4140 alloy steel material with Rc 38-42 hardness with plain finish. Production was done in the USA and the pins measured .10800″ +/- .00025″ in diameter and .375″ +/-.010″ in overall length. Full certs were provided with the parts per customer’s instructions.

The post Custom Precision Adapter Dowel Pins – 4140 Alloy Steel appeared first on Custom Dowel Pins & Precision Pins.

]]> 5606 Custom Precision 304 Stainless Steel Small Dowel Pins https://www.engineeredprecisionpins.com/portfolio/custom-precision-stainless-steel-small-dowel-pins-manufacturers/ Fri, 15 Apr 2022 16:12:32 +0000 https://www.engineeredprecisionpins.com/?post_type=liquid-portfolio&p=5603 The post Custom Precision 304 Stainless Steel Small Dowel Pins appeared first on Custom Dowel Pins & Precision Pins.

]]>

We had approximately 150,000 pieces of these small precision 304 stainless steel dowel pins manufactured for our customer with split scheduled releases. The pins measured 2.93-3.42MM in overall length with a diameter of 2.390MM +0/-.002. Slight 0.25MM radius was applied on both sides to complete the parts. Commercial passivation was performed prior to sorting of the parts and material certs were provided with the parts, as well as our certificate of conformance.

The post Custom Precision 304 Stainless Steel Small Dowel Pins appeared first on Custom Dowel Pins & Precision Pins.

]]> 5603 Custom Slotted Pins – DFARS Stainless Steel https://www.engineeredprecisionpins.com/portfolio/custom-slotted-pins-dfars-stainless-steel-manufacturers/ Fri, 18 Feb 2022 21:20:45 +0000 https://www.engineeredprecisionpins.com/?post_type=liquid-portfolio&p=5598 The post Custom Slotted Pins – DFARS Stainless Steel appeared first on Custom Dowel Pins & Precision Pins.

]]>

We had these custom slotted pins manufactured domestically for our aerospace customer using DFARS compliant 303 stainless steel material. The pins measure .094″ in diameter and .35″ in overall length, with the slot at .020″ in width by .115″ in depth. The outside profile tapered from .094″ diameter max to .088″ at the narrow side. Full certs were provided with the parts.

The post Custom Slotted Pins – DFARS Stainless Steel appeared first on Custom Dowel Pins & Precision Pins.

]]> 5598 Custom 17-4PH Precision Dowel Pins With Spherical Points https://www.engineeredprecisionpins.com/portfolio/custom-17-4ph-precision-dowel-pins-with-spherical-points/ Wed, 05 Jan 2022 21:41:48 +0000 https://www.engineeredprecisionpins.com/?post_type=liquid-portfolio&p=5593 The post Custom 17-4PH Precision Dowel Pins With Spherical Points appeared first on Custom Dowel Pins & Precision Pins.

]]>

We supplied our customer that manufactures fire pump equipment with these custom 17-4ph precision dowel pins using 100% domestic production with DFARS compliant raw material and full certs – material certs, heat treat certs, and a certificate of conformance. The pins were produced to a diameter of .1249-.1251″ and overall length of .670-.675″ with equal spherical radii on both sides. Parts went through heat treatment to achieve the Rc36 hardness minimum requirement.

The post Custom 17-4PH Precision Dowel Pins With Spherical Points appeared first on Custom Dowel Pins & Precision Pins.

]]> 5593 Precision Custom Locating Dowel Pins For Gear Units https://www.engineeredprecisionpins.com/portfolio/precision-custom-locating-dowel-pins-manufacturers/ Fri, 30 Jul 2021 21:31:06 +0000 https://www.engineeredprecisionpins.com/?post_type=liquid-portfolio&p=5582 The post Precision Custom Locating Dowel Pins For Gear Units appeared first on Custom Dowel Pins & Precision Pins.

]]>

We had 500 pieces of these large custom locating dowel pins manufactured domestically in alloy steel material, with heat treat to achieve 47-58 HRC core hardness.  The original drawings were fairly aged and it was difficult to figure out how the transition point between the round and hex portions of the pins should be formed.  We ended up producing samples with two different alternative interpretations and allow the customer to test for the ideal option pictured here.  The round portion of the pin has a diameter of .625″ + .0003″/-0″ while the hex portion across the flats had to meet .7497 +.0002″/-0″.  Overall length was set to 1.4375″.  Full certs with FAIR were available with the parts.

The post Precision Custom Locating Dowel Pins For Gear Units appeared first on Custom Dowel Pins & Precision Pins.

]]> 5582 Custom Large Stainless Steel Pins https://www.engineeredprecisionpins.com/portfolio/custom-large-stainless-steel-pin-factories/ Thu, 29 Jul 2021 14:31:20 +0000 https://www.engineeredprecisionpins.com/?post_type=liquid-portfolio&p=5580 The post Custom Large Stainless Steel Pins appeared first on Custom Dowel Pins & Precision Pins.

]]>

We had approximately 10,000 pieces of these custom large stainless steel pins manufactured for a customer installation in Italy. 303 stainless steel was used for production and the pins measured .249″ in diameter by 5″ in overall length. A slight 45 degree chamfer was added on both sides to remove any sharp edges. This was a relatively simple part but needed to be manufactured quickly with all delivery to Italy within 75 days from order.

The post Custom Large Stainless Steel Pins appeared first on Custom Dowel Pins & Precision Pins.

]]> 5580 Custom Long Stainless Steel Dowel Pins – 303 Stainless Steel https://www.engineeredprecisionpins.com/portfolio/custom-long-stainless-steel-dowel-pin-manufacturers/ Fri, 30 Oct 2020 19:04:12 +0000 https://www.engineeredprecisionpins.com/?post_type=liquid-portfolio&p=5569 The post Custom Long Stainless Steel Dowel Pins – 303 Stainless Steel appeared first on Custom Dowel Pins & Precision Pins.

]]>

These custom long stainless steel dowel pins were manufacture domestically using 303 stainless steel material.  The diameter was set to 2.002mm to 2.008mm and the length was set to 100mm +/-.01mm.  Full certs were provided with the parts and thorough QC testing was done on the straightness.

The post Custom Long Stainless Steel Dowel Pins – 303 Stainless Steel appeared first on Custom Dowel Pins & Precision Pins.

]]> 5569 Custom Hardened Dowel Pins – SAE 52100 Steel Material https://www.engineeredprecisionpins.com/portfolio/custom-hardened-dowel-pins-manufacturer/ Thu, 01 Oct 2020 21:10:44 +0000 https://www.engineeredprecisionpins.com/?post_type=liquid-portfolio&p=5565 The post Custom Hardened Dowel Pins – SAE 52100 Steel Material appeared first on Custom Dowel Pins & Precision Pins.

]]>

We supplied our automotive manufacturing custom with these custom hardened dowel pins in SAE 52100 steel material, heat treated to reach 81.0 – 83.5 HRA.  The diameter was ground to 7.000MM +/- .005MM and the length was set to 32.0MM +/- 0.2MM.  The pins were manufactured domestically in the USA and full certs were provided with the shipment.

The post Custom Hardened Dowel Pins – SAE 52100 Steel Material appeared first on Custom Dowel Pins & Precision Pins.

]]> 5565